ASP源码.NET源码PHP源码JSP源码JAVA源码DELPHI源码PB源码VC源码VB源码Android源码
当前位置:首页 >> 网络编程 >> PHP教程 >> CentOS6.5+apache+mysql+php+Ruby+Redmine+phpMyAdmin+BugFree

CentOS6.5+apache+mysql+php+Ruby+Redmine+phpMyAdmin+BugFree

来源:网络整理     时间:2015-03-18     关键词:

本篇文章主要介绍了"CentOS6.5+apache+mysql+php+Ruby+Redmine+phpMyAdmin+BugFree",对于PHP教程感兴趣的同学可以参考一下: 一.安装版本说明CentOS: 6.5-x86_64Apache: 2.4.9PHP: 5.5.6Ruby: 2.1.5Redmine...

一.安装版本说明

CentOS:   6.5-x86_64

Apache:   2.4.9

PHP:          5.5.6

Ruby: 2.1.5

Redmine: 2.5.2

Mysql: 5.6.16

二.安装CentOS_6.5-x86_64

1.      系统安装流程

界面1选择基本存储设备

界面2选择全新安装

界面3主机名:localhost,同时左下角点击配置网络

弹出的网络链接界面中,选择Systemeth0 点击编辑

弹出的System eth0编辑界面中,选中自动连接,选择IPv4标签,方法改为手动。

点击添加,地址栏里IP输入192.168.1.XXX,子网掩码输入24         ,网关输入192.168.1.1

DNS服务器:202.96.209.133,点击应用

关闭网络链接界面

界面4,默认

界面5,密码:XXXXX

界面6,选择使用所有空间,左下角的查看并修改分区布局,勾上

界面7,数据存储设备区域中,将安装的硬盘移动到右边的安装目标设备中,并且点击选中引导装载程序。

界面8,删除LVM卷组下的设备,删除设备下的分区标签,如sda1,sda2等,仅保留sda,sdb这类的设备标签。

创建新的分区方案,方案如下:

Sdb1           /boot        ext4          100MB    强制主分区

Sdb2           /                 ext4          20 GB

Sdb3           /usr/local ext4          50GB

Sdb4           扩展分区

           Sdb5          /var           ext4          20 GB                建议将所有的系统日志指向该目录的log目录下

Sdb6                        swap         6144 MB           内存的1-2倍之间,建议1.5

           Sdb7          /home      ext4          剩余全部空间

界面9,点击更换设备,选择引导扇区的第一分区

界面10,选择Minimal Desktop

安装完成后重启

创建用户名:redmine 密码:XXXXX

设置时间网络同步

启动kdump,默认

完成后重启。

2.      安装基本依赖组件

# su -          //转root

# yum -y install makeapr* autoconf automake gcc gcc-c++ zlib-devel openssl openssl-devel pcre-develgd  kernel keyutils  patch  perl kernel-headers compat* mpfr cppglibc libgomp libstdc++-devel ppl cloog-ppl keyutils-libs-devellibcom_err-devel libsepol-devel libselinux-devel krb5-devel zlib-devel libXpm*freetype libjpeg* libpng* php-common php-gd ncurses* libtool* libxml2libxml2-devel patch lrzsz vin curl-devel php-mcrypt  libmcrypt libmcrypt-devel vim mod_ssl

3.      修改防火墙

# vi/etc/sysconfig/iptables    //修改防火墙配置文件,开放相应端口

-A INPUT -m state --state NEW -m tcp-p tcp --dport 22 -j ACCEPT

-A INPUT -m state --state NEW -m tcp-p tcp --dport 80 -j ACCEPT

-A INPUT -m state --state NEW -m tcp-p tcp --dport 80009000-j ACCEPT

-A INPUT -m state --state NEW -m tcp-p tcp --dport 3306 -j ACCEPT

-A INPUT -m state --state NEW -m tcp-p tcp --dport 3000 -j ACCEPT

# /etc/init.d/iptablesrestart  #最后重启防火墙使配置生效

4.      关闭SELINUX

# vi /etc/selinux/config

   #SELINUX=enforcing       #注释掉

   #SELINUXTYPE=targeted    #注释掉

   SELINUX=disabled         #增加

# reboot   #重启系统

 

三.安装Mysql-5.6.16

# su -         //改成root用户权限

1.      安装cmake-2.8.10.2

# tar -xzvfcmake-2.8.10.2.tar.gz  

# cd cmake-2.8.10.2  

# ./bootstrap

# make

# make install  

# cd ..

2.      设置mysql用户组

# groupadd mysql

# useradd -r -g mysql mysql

3.      创建mysql 安装目录

# mkdir -p /usr/local/mysql      ///程序目录

# mkdir -p /home/data/mysqldb      //数据文件目录

4.      编译安装MySQL-5.6.16

# tar -zxvf mysql-5.6.16.tar.gz 

# cd mysql-5.6.16

# cmake-DCMAKE_INSTALL_PREFIX=/usr/local/mysql  -DMYSQL_DATADIR=/home/data/mysqldb-DMYSQL_TCP_PORT=3306 -DSYSCONFDIR=/etc -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock-DDEFAULT_CHARSET=utf8  -DDEFAULT_COLLATION=utf8_bin-DWITH_EXTRA_CHARSETS:STRING=utf8,gbk -DWITH_INNOBASE_STORAGE_ENGINE=1-DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1-DWITH_DEBUG=0 -DWITH_READLINE=1 -DWITH_SSL=yes

#(有时候会出现找不到/usr/local/mysql/data 等警告,不管他,直接继续编译)

# rm CMakeCache.txt              重新运行配置,需要删除CMakeCache.txt文件

# make

# make install

5.      修改安装目录

# cd /usr/local/mysql

# chown -R mysql:mysql .

6.      修改数据库文件目录

# cd /home/data/mysqldb

# chown -R mysql:mysql .

7.      初始化数据库

# cd /usr/local/mysql

# scripts/mysql_install_db--user=mysql --datadir=/home/data/mysqldb

 

8.      复制mysql服务启动配置文件

# cp/usr/local/mysql/support-files/my-default.cnf /etc/my.cnf     (可以覆盖)

9.      复制mysql服务启动脚本及加入PATH路径

# cp support-files/mysql.server/etc/init.d/mysqld

#vi /etc/profile

PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH

export PATH

# source /etc/profile

# vi /etc/my.cnf

在[mysqld]下添加

datadir =/home/data/mysqldb

10.  设置开机启动mysql

         # chmod 755 /etc/init.d/mysqld

# chkconfig mysqld on

11.  修改mysql 密码

# service mysqld start

# /usr/locsl/mysql/bin/mysqladmin -uroot -p password "jorudan0407"

# service mysqld restart

# /usr/local/mysql/bin/mysql -u root–p //新密码登录验证

mysql> showdatabases;

四.安装Ruby-2.1.5

1.       安装ruby-2.1.5

# tar xzf ruby-2.1.5.tar.gz

# cd ruby-2.1.5

# ./configure --prefix=/usr/local/ruby

# make

# make install

# cd ..

添加到环境变量

# vi /etc/profile

export PATH=/usr/local/ruby/bin:$PATH

# source /etc/profile

查看ruby版本号

# ruby -v

ruby 2.1.5p273(2014-11-13 revision 48405) [x86_64-linux]

2.       安装rubygems-2.4.6

# tar xzf rubygems-2.4.6.tgz

# cd rubygems-2.4.6

# ruby setup.rb

# cd ..

提示:gem是一种文件组织的包,一般的ruby的很多插件都有由这种各种的包提供。

# gem -v

2.4.6

# which gem

/usr/local/ruby/bin/gem

3.       安装rails-3.2.19

# gem sources -l

*** CURRENT SOURCES ***

https://rubygems.org/

# gem sources --remove https://rubygems.org/

https://rubygems.org/ removed from sources

# gem sources -ahttps://ruby.taobao.org/

https://ruby.taobao.org/ added to sources

# gem sources -l

*** CURRENT SOURCES ***

https://ruby.taobao.org/

Redmine需要考虑Ruby版本兼容性问题,请参考:

http://www.redmine.org/projects/redmine/wiki/RedmineInstall

Redmine选择安装2.5.3版本,因此rails安装3.2版本

# gem install rails -v=3.2.19

# rails -v

Rails 3.2.19

五.安装Apache-2.4.9

1.      安装apr-1.5.1

# tar –zxf apr-1.5.1.tar.gz

# cd apr-1.5.1

# ./configure –prefix=/usr/local/apr

# make

# make install

# cd ..

 

2.      安装apr-util-1.5.4

# tar –zxf apr-util-1.5.4.tar.gz

# cd apr-util-1.5.4

# ./configure --prefix=/usr/local/apr-util--with-apr=/usr/local/apr/bin/apr-1-config

# make

# makr install

# cd ..

3.      安装pcre-8.33

# tar –zxf pcre-8.33.tar.gz

# cd pcre-8.33

# ./configure --prefix=/usr/local/pcre 

# make

# make install

# cd ..

4.      安装openssl-1.0.1l

# tar –zxf openssl-1.0.1l.tar.gz

# cd openssl-1.0.1l

# ./config --prefix=/usr/local/openssl -fPIC no-gost

# make

# make install

# cd ..

5.      安装apache-2.4.9

# tar –zxf httpd.2.4.9.tar.gz

# cd httpd.2.4.9

# ./configure --prefix=/usr/local/apache2--with-mpm=worker --enable-cache --enable-disk-cache --enable-mem-cache--enable-file-cache --enable-nonportable-atomics --enable-mods-shared=most --enable-so--enable-rewrite--enable-ssl --with-apr=/usr/local/apr/ --with-apr-util=/usr/local/apr-util/ --with-pcre=/usr/local/pcre --with-ssl=/usr/local/openssl

# make

# make install

# cd ..

6.      追加fcgid模块

# tar zxvf mod_fcgid-2.3.6.tar.gz

# cd mod_fcgid-2.3.6

# APXS=/usr/local/apache2/bin/apxs./configure.apxs   ----->/soft/apache/bin是apache的安装地址

# make

# make install

7.      设置apache 开机启动

需注意,如果系统自身带着httpd服务的话,需要先卸载

         # yum list |grep httpd

         如果存在

         # yum remove httpd

         正式进行设置开机启动

# cp /usr/local/apache2/bin/apachectl/etc/rc.d/init.d/httpd

# vi /etc/rc.d/init.d/httpd

#!/bin/sh后面加入下面两行

#chkconfig:345 85 15

#description:Start and stops the Apache HTTP Server.

         # chmod +x /etc/rc.d/init.d/httpd

         # chkconfig --add httpd

        

8.      修改 http.conf

# mkdir –p /var/www/html      //创建www根目录

# vi/usr/local/apache2/conf/httpd.conf

         添加ServerName localhost:80

         Listen 8000      //redmine虚拟服务器预留端口

         Listrn 8008       //bugfree虚拟服务器预留端口

         修改

         DocumentRoot "/usr/local/apache2/htdocs”

DocumentRoot"/var/www/html"

 

         <Directory "/usr/local/apache2/htdocs">

<Directory"/var/www/html">

 

         CustomLog "logs/access_log"common

CustomLog "/var/log/httpd/access_log"common

ErrorLog"logs/error_log"

ErrorLog"/var/log/httpd/error_log"

9.      验证

重启apache,

# service httpd restart

然后用浏览器打开网页。

六.安装PHP-5.5.6

1.      安装zlib-1.2.8

# tar zxvf zlib-1.2.8.tar.gz

# cd zlib-1.2.8

# ./configure--prefix=/usr/local/zlib

# make

# make install

# cd ..

2.      安装libxml2-2.7.1

# tar zxvf libxml2-2.7.1.tar.gz

# cd libxml2-2.7.1

# ./configure--prefix=/usr/local/libxml2 --without-zlib

# make

# make install

# cd ..

3.      安装libpng-1.2.31

# tar zxvf libpng-1.2.31.tar.gz

# cd libpng-1.2.31

# ./configure--prefix=/usr/local/libpng

# make

# make install

# cd ..

4.      安装freetype-2.5.0.1

# tar zxvf freetype-2.5.0.1.tar.gz

# cd freetype-2.5.0.1

# ./configure--prefix=/usr/local/freetype -without-png

# make

# make install

# cd ..

5.      安装jpeg9

# tar zxvf jpegsrc.v9.tar.gz

# cd jpeg-9/

# ./configure--prefix=/usr/local/jpeg9

# make

# make install

# cd ..

6.      安装libmcrypt-2.5.7

# tar -zxvf libmcrypt-2.5.7.tar.gz

# cd libmcrypt-2.5.7

# mkdir -p /usr/local/libmcrypt

# ./configureprefix=/usr/local/libmcrypt/

# make

# make install

# cd ..

7.      安装GD-2.0.35

# tar -zxvf gd-2.0.35.tar.gz

# mkdir -p /usr/local/gd

# cd gd-2.0.35

# ./configure --prefix=/usr/local/gd--enable-m4_pattern_allow --with-jpeg=/usr/local/jpeg9--with-png=/usr/local/libpng --with-zlib=/usr/local/zlib--with-freetype=/usr/local/freetype --with-libmcrypt=/usr/local/libmcrypt

# make

# make install

# cd ..

8.      安装PHP-5.5.6

# tar -zxvf php-5.5.6.tar.gz

# cd php-5.5.6

# ./configure--prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc--with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-mysql-sock=/tmp/mysql.sock--with-gd  --with-iconv--with-freetype-dir=/usr/local/freetype --with-jpeg-dir=/usr/local/jpeg9--with-png-dir=/usr/local/libpng --with-zlib=/usr/local/zlib--with-libxml-dir=/usr/local/libxml2 --enable-xml --enable-bcmath--enable-shmop --enable-sysvsem --enable-inline-optimization --enable-mbregex--enable-mbstring --enable-ftp --enable-gd-native-ttf --without-pear--with-openssl --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip--enable-soap --with-gettext --enable-session --with-mcrypt=/usr/local/libmcrypt/--enable-mbstring --with-pdo-mysql=/usr/local/mysql

# make

# make install

# cp php.ini-production/usr/local/php/php.ini

9.      修改apache2配置,加载php模块

# vi/usr/local/apache2/conf/httpd.conf

LoadModule php5_module modules/libphp5.so

添加

AddTypeapplication/x-httpd-php  .php

AddTypeapplication/x-httpd-php-source .phps

 

修改

OptionsIndexes FollowSymLinks

Options Indexes FollowSymLinksIncludes IncludesNOEXEC ExecCGI

#service httpd restart

10.  验证phpinfo

# vim /usr/local/apache2/htdocs/index.php

         <?php

             date_default_timezone_set("PRC");

phpinfo();

?>

打开浏览器,访问192.168.1.32

11.  追加curl模块

# tar -zxvf curl-7.41.0.tar.gz

# cd/home/redmine/php-5.5.6/ext/curl          //php源码的目录

# /usr/local/php/bin/phpize./configure --with-php-config=/usr/local/php/bin/php-config--with-curl=/home/redmine/curl-7.41.0

# cd /home/redmine/curl-7.41.0

# make

# make install

修改php.ini文件

# vi /usr/local/php/php.ini

追加extension=curl.so

12.  踩过的坑

(1)直接在curl的源码目录最上层,运行phpize,提示如下错误:

Cannot find config.m4.

Make sure that you run'/home/zhuyx/local/php-5.5.3/bin/phpize' in the top level source directory ofthe module

原因:

  phpize扩展安装,源包需要有config.m4这个配置文件;当前扩展的源码包不包含(memcache的就包含)。

解决方法:

(1)进入php源码包的 ext/curl 下面运行phpize,再进行安装

(2)./configure --with-php-config=/php编译后目录/bin/php-config  --with-curl=curl源码目录

问题扩展:

安装其他的php扩展的时候,遇到类似问题,都可以采取上述解决方案。

七.安装phpMyAdmin-4.3.12

1.      安装phpMyAdmin-4.3.12

# unzipphpMyAdmin-4.3.12-all-languages.zip

# mvphpMyAdmin-4.3.12-all-languages /var/www/html/phpMyAdmin

 

打开浏览器,地址http://192.168.1.32/phpMyAdmin

2.      创建redmine数据库

登录phpMyAdmin,root/XXXX

创建2个redmine用户,主机分别为%,localhost,都对同名数据库具有最大权限。

八.安装Redmine-2.5.3

1.      部署程序文件

# tar xzf redmine-2.5.3.tar.gz -C /usr/local/

# mv /usr/local/redmine{-2.5.3,}

 

2.      安装redmine依赖的所有ruby包

# cd /usr/local/redmine

# gem install mysql2  #用mysql2能提供性能

         # gem install bundler #注意是在网站根目录下执行

Successfully installed bundler-1.8.5

Parsing documentation for bundler-1.8.5

Done installing documentation for bundlerafter 3 seconds

1 gem installed

           # bundle install --withoutdevelopment test rmagick  #完成redmine依赖包的安装

bundler是用来管理ruby的包依赖的工具

Gem::RemoteFetcher::FetchError:Errno::ETIMEDOUT: Connection timed out - connect(2) for "rubygems.global.ssl.fastly.net"port 443 (https://rubygems.org/gems/builder-3.0.0.gem)

An error occurred while installing builder(3.0.0), and Bundler cannot continue.

Make sure that `gem install builder -v'3.0.0'` succeeds before bundling.

# gem install builder -v'3.0.0'

# gem install coderay -v'1.1.0'

         #gem install json -v '1.8.2'

# gem installjquery-rails -v '2.0.3'

         #gem install net-ldap -v '0.3.1'

         #gem install ruby-openid -v '2.3.0'

         #gem install rack-openid -v '1.4.2'

         #gem install redcarpet -v '2.3.0'

         #bundle install --without development test rmagick  # 再次执行

 

3.      初始化redmine数据库

修改Redmine的database.yml

           # cd /usr/local/redmine/config

           # cp database.yml.exampledatabase.yml

           # vi database.yum               #修改对应数据库连接信息

production:

adapter: mysql2

database: redmine

host: 192.168.1.XXXX       //建议使用IP地址,而非机器名redmine.server,默认的webrick在解析服务器名称方面效率非常低,导致响应非常慢,redmine.server

username: redmine

password: "XXXXX"

encoding: utf8

为Rails生成cookies秘钥

         # rake generate_secret_token

创建数据库结构

         # RAILS_ENV=production rakedb:migrate

生成缺省数据

         # RAILS_ENV=productionREDMINE_LANG=zh rake redmine:load_default_data

 

4.      调整文件系统权限

           # cd /data/wwwroot/redmine

           # mkdir -p public/plugin_assets

           # chown -R redmine/usr/local/redmine/

           # chmod -R 755 /usr/local/redmine/

tmp和tmp/pdf (若不存在则创建该路径,用于生成 PDF 文件);public/plugin_assets(若不存在则创建该路径,plugins资源)

 

5.      修改redmine配置文件

# cpconfiguration.yml.example configuration.yml

# mkdir -p /home/data/redmine/attachments

      # chown -R redmine/home/data/redmine

         #chmod -R 755 /home/data/redmine

         #mkdir -p /var/log/redmine

         #chown -R redmine.redmine /var/log/redmine

# vi configuration.yml

         修改delivery_method: smtp

delivery_method: async_smtp

attachments_storage_path: /home/data/redmine/attachments

         scm_stderr_log_file:/var/log/redmine/scm_stderr.log

         :wq 退出

6.       启动和关闭redmine

         # vi /etc/passwd                   #使www用户有bash权限,lnmp脚本安装www用户没有bash权限

                    redmine:x:501:501::/home/redmine:/bin/bash

         # su redmine -c "rubyscript/rails server webrick -e production -d"

或# rubyscript/server webrick -e production -d

或# ruby/usr/local/redmine/script/server webrick -e production –d

地址:http://IP:3000(注意:打开iptables 3000端口号)

缺省管理员用户:

login: admin

password: admin

停止服务方法:(ps命令查出此进程的pid号,再杀掉,目前好像只能这样,我看了--help里面,还没有停止的参数。)

# ps aux | grep ruby

# kill -9 [PID]

九.整合Apache和Redmine

1.      安装Passenger

# gem install passenger

Fetching: passenger-5.0.4.gem (100%)

Building native extensions. This could take a while...

Successfully installed passenger-5.0.4

Parsing documentation for passenger-5.0.4

Installing ri documentation for passenger-5.0.4

Done installing documentation for passenger after 5 seconds

1 gem installed

# passenger-install-apache2-module

         Welcome to the PhusionPassenger Apache 2 module installer, v5.0.4.

This installer will guide you through the entire installationprocess. It

shouldn't take more than 3 minutes in total.

Here's what you can expect from the installation process:

 1. The Apache 2 module willbe installed for you.

 2. You'll learn how toconfigure Apache.

 3. You'll learn how to deploya Ruby on Rails application.

Don't worry if anything goes wrong. This installer will advise youon how to

solve any problems.

Press Enter to continue, or Ctrl-C to abort.

输入回车,显示

--------------------------------------------

Which languages are you interested in?

Use <space> to select.

If the menu doesn't display correctly, press '!'

 ? ?  Ruby

   ? Python

   ? Node.js

   ? Meteor

继续按回车

Installation instructions for required software

 * To install Apache 2:

   Please install it with yuminstall httpd

 * To install Apache 2development headers:

   Please install it with yuminstall httpd-devel

 * To install Apache PortableRuntime (APR) development headers:

   Please install it with yuminstall apr-devel

 * To install Apache PortableRuntime Utility (APU) development headers:

   Please install it with yuminstall apr-util-devel

If the aforementioned instructions didn't solve your problem, thenplease take

a look at the Users Guide:

 /usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4/doc/Users guideApache.html

  https://www.phusionpassenger.com/documentation/Users%20guide%20Apache.html

# ln -s/usr/local/apache2 /etc/httpd

# mkdir -p /usr/lib/httpd

# ln -s/usr/local/apache2/modules /usr/lib/httpd/modules

# ln -s/usr/local/apache2/bin/httpd /usr/sbin/httpd

# rm /usr/sbin/apxs

# /bin/ln -s /usr/local/apache2/bin/apxs/usr/sbin/apxs

# yum install httpd-devel

# yum install apr-devel

# yum installapr-util-devel

# passenger-install-apache2-module

--------------------------------------------

Almost there!

Please edit your Apache configuration file, and add these lines:

   LoadModule passenger_module/usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4/buildout/apache2/mod_passenger.so

   <IfModulemod_passenger.c>

     PassengerRoot/usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4

     PassengerDefaultRuby/usr/local/ruby/bin/ruby

   </IfModule>

After you restart Apache, you are ready to deploy any number of web

applications on Apache, with a minimum amount of configuration!

Press ENTER to continue.

--------------------------------------------

Deploying a web application: an example

Suppose you have a web application in /somewhere. Add a virtual hostto your

Apache configuration file and set its DocumentRoot to/somewhere/public:

   <VirtualHost *:80>

      ServerNamewww.yourhost.com

      # !!! Be sure to pointDocumentRoot to 'public'!

      DocumentRoot/somewhere/public   

      <Directory/somewhere/public>

         # This relaxes Apachesecurity settings.

         AllowOverride all

         # MultiViews must beturned off.

         Options -MultiViews

         # Uncomment this ifyou're on Apache >= 2.4:

         #Require all granted

      </Directory>

   </VirtualHost>

And that's it! You may also want to check the Users Guide forsecurity and

optimization tips, troubleshooting and other useful information:

 /usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4/doc/Users guideApache.html

 https://www.phusionpassenger.com/documentation/Users%20guide%20Apache.html

Enjoy Phusion Passenger, a product of Phusion (www.phusion.nl) :-)

https://www.phusionpassenger.com

Phusion Passenger is a trademark of Hongli Lai & Ninh Bui.

         最终出现这个表示安装成功。

2.      配置Apache加载Passenger

# vi /usr/local/apache2/conf/httpd.conf

添加

LoadModulepassenger_module /usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4/buildout/apache2/mod_passenger.so

 

  <IfModule mod_passenger.c>

     PassengerRoot/usr/local/ruby/lib/ruby/gems/2.1.0/gems/passenger-5.0.4

     PassengerDefaultRuby/usr/local/ruby/bin/ruby

  </IfModule>

修改

         取消 LoadModulerewrite_module modules/mod_rewrite.so#注释

       取消Includeconf/extra/httpd-vhosts.conf #

:wq退出

3.      为redmine创建虚拟机

# vi /usr/local/apache2/conf/extra/httpd-vhosts.conf

把两个标签<VirtualHost *:80>的内容都注视掉

追加

         <VirtualHost*:8000>

    ServerName 192.168.1.XXXX

    ServerAdmin maoyunzhi@jorudan.com.cn

    # !!! Be sure to point DocumentRoot to'public'!

    DocumentRoot /usr/local/redmine/public

    <Directory /usr/local/redmine/public>

        # This relaxes Apache securitysettings.

        AllowOverride all

        # MultiViews must be turned off.

        Options -MultiViews

        # Uncomment this if you're on Apache>= 2.4:

        Require all granted

    </Directory>

    <Location />

        AddHandler fcgid-script .fcgi

        FCGIWrapper"/usr/local/ruby/bin/ruby /usr/local/redmine/public/dispatch.fcgi".fcgi

    </Location>

    ErrorLog"/var/log/httpd/redmine-error_log"

    CustomLog"/var/log/httpd/redmine-access_log" common

</VirtualHost>

         :wq   退出

# cd /data/wwwroot/redmine/public/

# cp dispatch.fcgi.exampledispatch.fcgi

# cp htaccess.fcgi.example. htaccess

4.      修改文件权限

# chown –R apache.apache/home/data/redmine

# chown –R apache.apache/usr/local/redmine

# chown –R apache.apache/var/log/redmine

5.      重启apache

# service httpd restart

打开浏览器,http://192.168.1.32:8000/

十.安装Bugfree-3.0.4

1.      安装bugfree-3.0.4

# unzipbugfree_v3.0.4.zip

# cd /var/www/html/bugfree3.0.4/

# chmod -R 777 install

2.      配置bugfree参数

打开浏览器 http://192.168.1.32/bugfree3.0.4/install/,对照路径权限,逐个修改

# mkdir -p /home/data/bugfree/BugFile

# chown -R apache.apache /home/data/bugfree

# chmod -R 755 /home/data/bugfree

# chmod -R 777 assets

# chmod -R 777 protected/runtime

# chmod -R 777 protected/config

# ln -s/home/data/bugfree/BugFile BugFile

# viprotect/config.sample.php

                   修改'uploadPath' => '../BugFile',

'uploadPath' =>'/home/data/bugfree/BugFile',

'picPreviewApp'=> 'http://'.$_SERVER['SERVER_ADDR'].'/BugFile',

'picPreviewApp' =>'http://'.$_SERVER['SERVER_ADDR'].':8008/BugFile',

:wq 退出

# vi install/index.php

         修改define('UPLOADPATH',realpath(dirname(dirname(dirname(__FILE__)))).DIRECTORY_SEPARATOR.'BugFile');

define('UPLOADPATH', realpath((dirname(dirname(__FILE__))).DIRECTORY_SEPARATOR.'BugFile');

//取消一对dirname取值

         :wq退出

         # vi protected/extensions/kindeditor4/assets/php/upload_json.php

                   修改$save_path = '../../.. /BugFile/';

$save_path ='/home/data/bugfree/BugFile/';

$save_url = 'http://'.$_SERVER['SERVER_ADDR'].'/BugFile/';

$save_url= 'http://'.$_SERVER['SERVER_ADDR'].':8008/BugFile/';

:wq 退出

         再次刷新安装配置页面,所有前置条件都满足后,选择继续,进入数据库配置界面。

打开phpMyAdmin界面,新建2个用户bugfree,设置主机分别为%和localhost,,密码zaq12wsx,并创建同名数据库。

在bugfree的数据库配置界面中,服务器为localhost,数据库名为bugfree,密码zaq12wsx,点击安装。

3.      配置apache虚拟服务器

# vi /usr/local/apache2/conf/extra/httpd-vhosts.conf

         <VirtualHost *:8008>

    ServerAdmin info@jorudan.com.cn

    DocumentRoot"/var/www/html/bugfree3.0.4"

    ServerName bugfree.jorudan.com.cn

    ErrorLog"/var/log/httpd/bugfree-error_log"

    CustomLog"/var/log/httpd/bugfree-access_log" common

    <Directory/var/www/html/bugfree3.0.4>

        Options Indexes FollowSymLinks IncludesIncludesNOEXEC ExecCGI

    </Directory>

</VirtualHost>

         :wq退出

4.      重启Apache

# service httpd restart

 

如果修改没有生效,请删除assets下所有文件,在刷新页面。

以上就介绍了CentOS6.5+apache+mysql+php+Ruby+Redmine+phpMyAdmin+BugFree,包括了方面的内容,希望对PHP教程有兴趣的朋友有所帮助。

本文网址链接:http://www.codes51.com/article/detail_119637.html

相关图片

相关文章